5 Series E60 530d (M57TU) SAL
Tightening torque 51 22 5AZ
.
a)
Pull off outside handle (1) from rear lock actuator (2).
b)
Pull off outside handle (1) downwards (as shown in
illustration) from front lock actuator (3).
Installation:
Following parts on outside handle (4) must not be damaged or
missing:
1
Rear mounting
2
Front mounting
3
Felt strip (if available for refitting/replacement no longer
required)
Stop pad (1) must be fitted.
Insert outside handle (4) with bore (3) correctly in mounting (2).
Engage mounting (5) of outside handle (4) correctly in lock
actuator (6).
Note:
Protect bore (1) against scratching/damaged paintwork (risk of
corrosion).
Important!
If the screw is not correctly secured, the lock mechanism can
jump back and the sound insulation must be removed.
Grip outside handle (2) and, using special tool
51 2 220 ,
screw down screw (3) in clockwise direction.
Tightening torque 51 22 5AZ
.
Carry out function check only with door open.
RA Removing and installing / replacing outside handle on left or right back door
BMW AG - TIS
21.02.2013 19:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
