5 Series E60 530d (M57TU) SAL
Release screws (1).
Remove gas cartridge complete with holder (2).
Release screws (1) on left and right.
Installation:
Insert screws (1) with Loctite.
Tightening torque 52 12 18AZ
.
Slide top rail (3) off bottom rail (2).
Remove gas cartridge (4).
Installation:
Gas cartridge (1) is secured in holder by guide lug (2).
Procedure after triggered active head restraint:
-
Push head restraint back into original position.
-
Insert new gas cartridge with spring clips.
Note:
The gas cartridge may be replaced up to 5 times.
Then the backrest must be replaced.
Number of triggerings are stored in the control unit.
RA Replacing gas cartridge for active head restraint on left or right front seat
BMW AG - TIS
21.02.2013 22:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
