bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

30 RA Removing And Installing_replacing Seat Cover For Left Or Right Front Seat (comfo|Page 2105 > < 29 RA Removing And Installing_replacing Front Left Or Right Crash-active Head Restrain
Page 1
background image

52 17 400

Removing and installing/replacing seat cover
for left or right front seat (comfort)

Special tools required:

00 9 317

52 0 050

Necessary preliminary tasks:

Remove front seat

Remove both rear panels on front seat backrest

Remove inner cover on front seat

Remove thigh support

Remove switch combination for seat adjustment

Warning!

US/CDN front passenger seat (with OC3 mat) only:

To avoid damaging the OC3 mat, it is essential to carry out
the following operations with extra care.

When replacing seat cover:

If seat cover is defective, seat cover and support with OC3 mat
must be replaced together.

New seat cover is supplied with support, OC3 mat and if
necessary seat heating.

When replacing support with OC3 mat:

If OC3 mat or support is defective, both parts may only be
replaced together.

These must be fitted with the seat cover from the car.

RA  Removing and installing/replacing seat cover for left or right front seat (comfo

BMW AG - TIS

21.02.2013  22:17

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

30 RA Removing And Installing_replacing Seat Cover For Left Or Right Front Seat (comfo|Page 2105 > < 29 RA Removing And Installing_replacing Front Left Or Right Crash-active Head Restrain