bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

13 Electrical Sun Roof Components > < 9 RA Removing And Installing_replacing Adjuster For Glass Slide_tilt Sunroof Lid|Page 2180
Page 1
background image

54 12 497

Removing and installing/replacing draft
deflector for glass slide/tilt sunroof

Open glass sunroof lid.

Lever out springs (1) on left/right.

Pull draft deflector (2) towards rear out of mounting (3).

Installation:

Carry out function check.

Installation:

Insert retaining pins (1) of draft deflector (2) into mountings (4).

Spring (3) must snap into place correctly.

Position draft deflector (1) vertically and pull together with
levers (2) on left/right upwards out of mounts (3).

Installation:

Turn lever (1) until lock (3) is flush with opening (2) and feed
lever (1) out of draft deflector (4).

RA  Removing and installing/replacing draft deflector for glass slide/tilt sunroof

BMW AG - TIS

21.02.2013  22:46

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

13 Electrical Sun Roof Components > < 9 RA Removing And Installing_replacing Adjuster For Glass Slide_tilt Sunroof Lid|Page 2180