bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

7 RA Removing And Installing_replacing Rain Channel For Glass Slide_tilt Sunroof > < 5 RA Replacing Seal For Glass Slide_tilt Sunroof Lid
Page 1
background image

54 12 136

Removing and installing/replacing headliner
for glass slide/tilt sunroof lid

Installation:

If headliner is difficult to move, apply a light coat of Renax GL1
(manufactured by Fuchs) to guide duct.

Remove glass sunroof lid.

Slowly pull headliner (floating) fully towards front.

Release screws (1).

Slowly slide spring slider (2) towards rear.

Note:

Make sure all parts are clean. If necessary, wear gloves.

Remove headliner (3) towards top.

RA  Removing and installing/replacing headliner for glass slide/tilt sunroof lid

BMW AG - TIS

21.02.2013  22:43

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

7 RA Removing And Installing_replacing Rain Channel For Glass Slide_tilt Sunroof > < 5 RA Replacing Seal For Glass Slide_tilt Sunroof Lid