bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

50 RA Removing And Installing_replacing Steering Wheel Electronics Control Unit|Page 2378 > < 49 RA Removing And Installing_replacing Multifunction Steering Wheel Switches (sport S
Page 1
background image

61 31 231

Removing and installing/replacing steering
wheel electronics control unit 

Necessary preliminary tasks:

Remove airbag unit

E60, E61: Version with standard steering wheel, illustrations
show steering wheel removed:

Release screws (1).

Remove steering wheel retaining plate (2) upwards out of
multifunction steering wheel (3).

E60, E61: Version with sports steering wheel; E63, E64,
illustrations show steering wheel removed:

Release screws (1).

Important!

Risk of breakage!

Lever out complete steering wheel retaining plate (4) with
decorative trim (3) all round, do not tilt!

Release complete steering wheel retaining plate (4) with
decorative trim (3) in direction of arrow from fixtures (2).

Disconnect associated plug connections and remove complete
steering wheel retaining plate (4) with decorative trim (3).

Installation:

Make sure electrical leads are correctly routed.

RA  Removing and installing/replacing steering wheel electronics control unit

BMW AG - TIS

22.02.2013  00:01

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

50 RA Removing And Installing_replacing Steering Wheel Electronics Control Unit|Page 2378 > < 49 RA Removing And Installing_replacing Multifunction Steering Wheel Switches (sport S