bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

16 RA Replacing Rain_light Solar Sensor|Page 2430 > < 15 RA Replacing Optical Element For Solar Rain_light Sensor|Page 2428
Page 1
background image

61 35 685

Replacing rain/light solar sensor

Important!

Read and comply with notes on protection against
electrostatic damage (ESD protection).

Expand two-part mirror base cover (1) by pressing from below
and detach.

Feed out two-part mirror base cover (1) and remove.

If necessary, remove interior rearview mirror .

Note:

Catches of two-part mirror base cover (1) must not be damaged.

Disconnect plug connection (1).

Unlock metal spring (3) in direction of arrow.

Pull off solar rain/light sensor (2) from windscreen.

Installation:

Connect plug (1) only after fitting sensor.

Pull off protective cover from new solar rain/light sensor.

Align solar rain-light sensor (2) and press firmly on windscreen.
Pay attention to mechanical coding (6).

Press metal spring (3) centrally to ensure that retaining element
(5) engages correctly in both hooks (4).

Clean windscreen in area (A) of fastening element and remove
residues of silicone.

RA  Replacing rain/light solar sensor

BMW AG - TIS

22.02.2013  00:24

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

16 RA Replacing Rain_light Solar Sensor|Page 2430 > < 15 RA Replacing Optical Element For Solar Rain_light Sensor|Page 2428