bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

10 RA Removing And Installing (replacing) Left B-pillar Sensor|Page 2802 > < 9 RA Removing And Installing (replacing) Airbag Control Unit With Gateway Module|Page 2800
Page 1
background image

65 77 720

Removing and installing (replacing) left B-
pillar sensor

Important!

Read and comply with notes on protection against
electrostatic damage (ESD protection).

Warning!

Note airbag safety instructions!

Incorrect handling can activate airbag and cause injury.

Note:

Follow instructions for handling optical fibers.

Necessary preliminary tasks:

Disconnect battery negative lead and cover

Remove trim panel for door pillar (bottom)

RA  Removing and installing (replacing) left B-pillar sensor

BMW AG - TIS

22.02.2013  02:52

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

10 RA Removing And Installing (replacing) Left B-pillar Sensor|Page 2802 > < 9 RA Removing And Installing (replacing) Airbag Control Unit With Gateway Module|Page 2800