5 Series E60 530d (M57TU) SAL
67 62 000
Removing and installing/replacing flat motor
for front left or right power window
Necessary preliminary tasks:
•
Detach soundproofing on front door in working area.
Unfasten plug connection (1) and disconnect.
Release screw (2) of locking bar (3).
Remove locking bar (3) in direction of arrow from flat motor for
power window unit (5).
Release screws (4).
Carefully press flat motor for power window unit (5) towards rear
out of mounting.
If necessary, pull power window unit forwards slightly and feed out
flat motor for power window unit (5) and remove.
Installation:
Make sure guides (1) are correctly seated when fitting retaining
clip (2).
Replacement:
A normalization must be carried out in order to activate anti-
trapping protection.
Operating sequence for normalization:
•
Open corresponding window completely.
•
Press corresponding power window switch into "Close one-
touch operation" (second switch stage).
•
Once the upper end position has been reached, hold power
window switch down for approx. 500 secs. more.
RA Removing and installing/replacing flat motor for front left or right power windo
BMW AG - TIS
22.02.2013 03:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
