5 Series E60 530i (N52) SAL
![background image](/bmw/5_Series_E60/530i_N52_SAL/page-232001.png)
12 42 500
Replacing battery positive lead (between
starter, alternator and battery positive
terminal)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Disconnect battery negative lead
Observe instructions for disconnecting and connecting
battery
•
Remove intake air manifold
Release screw, remove battery positive lead (1) from battery
positive terminal.
Tightening torque 12 42 1AZ
.
Release nut and remove battery positive lead (1) from alternator.
Tightening torque 12 31 1AZ
.
RA Replacing battery positive lead (between starter, alternator and battery positiv
BMW AG - TIS
21.02.2013 13:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -