5 Series E60 530i (N52) SAL
Remove door handle protective cover (1)
Tightening torque 51 71 22AZ
Note:
Version with Comfort Access/CA:
CA sensor (2) must not be damaged.
Unlock catches (3) on carrier (1).
Press carrier (1) behind door outer skin (4).
If necessary, disconnect plug on CA module.
Pull carrier (3) towards rear/top until screw (1) of sheet metal
slot (2) is free.
Remove carrier (3) for outside door handle.
Installation:
Seals (1) on carrier (3) must not be damaged.
Important!
Water drainage channel (2) must not be fouled/clogged.
RA Removing and installing/replacing carrier for left or right outside door handle
BMW AG - TIS
21.02.2013 21:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -