5 Series E60 530i (N52) SAL
51 31 242
Replacing rubber frame (bottom) for rear
window (Security)
Open rear lid.
Important!
Rubber frame (1) features an aluminium section inlay (2).
Carefully unwind rubber frame (1) (rear window breakage).
3
Crushed butyl omitted
4
Glue
5
Rear window
Installation:
Replacement of rubber frame without rear window removal:
Cut open rubber frame at marked point (6) and remove rib over
entire length.
Apply adhesive in groove on windscreen side and stick in rubber
frame (1).
Replacement of rubber frame with removed or new rear window:
Cut open rubber frame at marked point (6) and remove rib over
entire length.
Apply adhesive in groove on windscreen side and stick in rubber
frame (1).
2
Aluminium strip
3
Crushed butyl omitted
4
Rib omitted
5
Tear-off lip omitted
RA Replacing rubber frame (bottom) for rear window (Security)
BMW AG - TIS
21.02.2013 21:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -