5 Series E60 530Li (N52) SAL
Screw aluminium Helicoil into workpiece (1) as far as it will go.
Remove Helicoil-Plus (2) again after screwing in.
Installation:
Aluminium Helicoil remains in workpiece (1).
Break mounting hook off with mounting mandrel (1).
Note:
Blow mounting hook out of pocket hole with compressed air.
Assemble engine.
RA Repairing threads on magnesium engine block
BMW AG - TIS
21.02.2013 15:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -