5 Series E60 530Li (N52) SAL
11 24 571
Replacing all connecting rod bearings (N52)
Special tools required:
•
00 2 590
•
00 9 120
Important!
All crank pins are connected with the crankshaft.
Modified procedure; the bearing shell colours are the same at
the top and bottom.
Blue / Red bearing shell colours are no longer used in
combination.
Necessary preliminary tasks:
•
Remove all pistons.
Important!
Note grinding stages on crankshaft.
Reworking (5) as per table (lift bearing).
B = construction stage 1 (- 0.25 mm)
C = construction stage 2 (- 0.50 mm)
RA Replacing all connecting rod bearings (N52)
BMW AG - TIS
21.02.2013 16:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -