5 Series E60 530Li (N52) SAL
18 40 050
Removing and installing / replacing front
exhaust manifold (N52)
Necessary preliminary tasks:
•
Remove acoustic cover
•
Remove complete exhaust system
•
Remove right engine support arm
Note:
The oxygen sensors are in danger of being damaged when the
exhaust manifolds are removed and installed.
Remove control sensor from cylinders 1 to 3.
Remove monitor sensor from cylinders 1 to 3.
Unscrew nuts.
Remove exhaust manifold (1).
Installation:
Clean sealing faces and replace seals.
Replace nuts.
Tightening torque 18 40 1AZ
.
RA Removing and installing / replacing front exhaust manifold (N52)
BMW AG - TIS
21.02.2013 17:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -