5 Series E60 530Li (N52) SAL
41 62 014
Adjusting rear lid
Read contents of Body, General.
The E60 gap dimensions serve as the basis for adjustment work.
Make unpainted surfaces visible by also moving the hinges. Touch
these up in the appropriate color.
Release screws (1) on rear lid hinge to rear lid so that rear lid can
still be moved.
Adjust rear lid.
Tighten bolts.
Tightening torque 41 62 1AZ
.
Adjusting height of rear lid in relation to side panel:
•
Remove tension spring
•
Remove cap from opening (1)
Note:
Parcel shelf is shown removed for purposes of clarity.
Slacken nut (1) with a suitable tool (13 mm A/F) until hinge (2) can
be moved.
Adjust height of rear lid.
Adjust rear lid lock.
Tighten nut.
Tightening torque 41 62 4AZ
.
RA Adjusting rear lid
BMW AG - TIS
21.02.2013 23:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -