5 Series E60 530Li (N52) SAL
51 23 100
Removing and installing/replacing right
engine hood/bonnet lock
Special tools required:
•
00 9 317
Unclip coupling (1) with special tool
00 9 317 from side panel.
Lever out cover (2) at coupling (1).
Lever Bowden cable (3) out of coupling (1).
Note:
The operation "Disconnect pull cable for hood/bonnet locks" ends
here.
Release Bowden cable (1) from holder (2).
Release screws (1).
Feed out hood/bonnet lock (2) in direction of arrow.
Tightening torque 51 23 2AZ
.
RA Removing and installing/replacing right engine hood/bonnet lock
BMW AG - TIS
22.02.2013 01:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -