5 Series E60 530Li (N52K) SAL
33 55 000
Removing and installing / replacing rear
stabilizer
Necessary preliminary tasks:
•
Remove stabilizer link on both sides from stabilizer
If necessary, remove vibration damper from right retaining bracket
of stabilizer.
Tightening torque 33 55 6AZ
.
Release nuts at both ends.
Remove stabilizer sideways.
Installation:
Check rubber mount on both sides, replace if necessary.
Replace self-locking nuts.
Tightening torque 33 55 3AZ
.
Replacement:
Remove rubber mount on both sides from stabilizer.
RA Removing and installing / replacing rear stabilizer
BMW AG - TIS
21.02.2013 21:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
