5 Series E60 530Li (N52K) SAL
Turn seat pan in seat mechanism and feed out towards front.
Unclip seat wiring harnesses from seat pan.
Remove seat pan.
The new seat module is secured to the new seat pan in the area
marked "R".
Wiring harness (1) must be relaid accordingly.
Pay attention to new clip positioning (2).
Carry out programming/coding.
RA Removing and installing (replacing) control unit for left or right seat adjustme
BMW AG - TIS
22.02.2013 05:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -