5 Series E60 530xd (M57T2) SAL
E90:
Unlock fasteners (1) from below and slide upwards approx.
10 mm.
Unlock slide (2) in direction of arrow.
Remove cover (3).
Unlock and disconnect plug on control unit.
Pull out lock (1) in direction of arrow.
Press out plug (2) in direction of arrow.
Unlock plug (1) and remove.
Unfasten screws.
Remove cable duct (2) with wiring harness.
Note:
Now clear the fault memory.
RA Replacing wiring harness section for injectors (M57T2)
BMW AG - TIS
21.02.2013 23:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -