5 Series E60 530xd (M57T2) SAL
Screw special tool 13 5 192 into timing case cover.
Firmly screw special tool 13 5 191 without jack screw (1) into
sprocket wheel by hand.
Screw in jack screw (1) and pretension H.P. pump.
Unscrew nuts (1).
Note:
Illustrations show M47TU.
Tighten jack screw (1) until high-pressure pump is released from
pump impeller.
Important!
Special tools 13 5 191 and 13 5 192 must remain in
timing case for securing purposes and must not be removed
under any circumstances (risk of damage!).
Remove jack screw (1) to install high-pressure pump.
RA Removing and installing/replacing high-pressure pump (M57TU / M57T2)
BMW AG - TIS
21.02.2013 23:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -