5 Series E60 530xd (M57T2) SAL
Replacing rubber mount:
Remove both tension struts.
Important!
If the tension struts already feature an identification mark with
a centre punch, it is necessary to replace both tension struts.
Mark tension struts with a punch mark in area (A).
Using a press and special tools 31 3 031 and 31 3 032 ,
press rubber mount out of tension strut.
Note:
Special tool 31 3 031 must be exactly flush with rubber mount
bushing.
Installation:
Keep rubber mount and bushing in tension strut clean and free
from grease.
Align rubber mount by way of arrow to marking on tension strut
and press in. The deviation (A) must not exceed
±
5
°
.
RA Replacing rubber mounts on both tension struts (AWD)
BMW AG - TIS
22.02.2013 01:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
