5 Series E60 530xd (M57T2) SAL
41 11 028
Replacing left engine carrier (partial
replacement before front axle)
Read contents of Body, General.
Refer to the description texts of the KSD CD (FRU
41 11 028) for details of stripping-down and rigging work.
The weight-reduced aluminum front end structure (GRAV)
is used on this vehicle.
Observe specific procedure.
Place vehicle on straightening bench.
Following new body parts are required (refer to EPC):
-
(1) Partial section, engine carrier
-
(2) Repair element, top
-
(3) Repair element, bottom
The engine carrier partial section is supplied with longer bolts for
the E60 and E61. The bolts do not have to be shortened.
Open riveted joints in areas (1).
Open EMC weld seam in area (1).
Installation:
Carry out sectional repair.
•
Drill through holes for rivets in areas (1).
•
Use size 15 blind rivets (4 x).
Use 4 EMC screws in areas (1).
RA Replacing left engine carrier (partial replacement before front axle)
BMW AG - TIS
22.02.2013 04:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
