5 Series E60 530xd (M57T2) SAL
51 31 242
Replacing rubber frame (bottom) for rear
window
Open rear lid.
Important!
Rubber frame (1) features an aluminium section inlay (2).
Carefully unwind rubber frame (1) (rear window breakage).
Note:
Tear-off lip (5) may be stuck to adhesive (6).
When rubber frame (1) is removed, tear-off lip (5) can tear off
and remain in vehicle.
3
Pinched butyl
4
Bridge
7
Rear window
Installation:
There is no tear-off lip (5) in area (A) on left/right.
Replacement of rubber frame without rear window removal:
Detach tear-off lip (3) from rubber frame (1).
If adhesive has managed to get onto bridge (4), this area must be
cut out partially.
Replacement of rubber frame with removed or new rear window:
Fit rubber frame (1) with tear-off lip (5).
2
Aluminum strip
3
Butyl
RA Replacing rubber frame (bottom) for rear window
BMW AG - TIS
22.02.2013 07:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -