5 Series E60 530xd (M57T2) SAL
Installation:
Make sure hook (1) engages in slot (2).
Trim, bottom rail, rear:
1.
Move seat forwards
2.
Unclip trim tongue towards top
3.
Briefly pull inner trim section inwards
4.
Detach trim towards rear from bottom rail
Installation:
Clips and hooks must not be damaged.
Make sure trims are exactly seated.
After completing tasks, move seat and make sure that trim does
not move.
RA Removing and installing/replacing all trims on left or right seat rails
BMW AG - TIS
22.02.2013 08:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -