5 Series E60 530xd (M57T2) SAL
64 12 577
Replacing changeover valve for
independent/auxiliary heater
Warning!
Danger of scalding!
Only perform the following tasks on an engine that has cooled
down.
Follow instructions for working on cooling system.
Note:
Disconnect coolant hoses from changeover valve for
independent/auxiliary heater.
Necessary preliminary tasks:
•
Remove front left wheel arch trim
Important!
Risk of damage!
Observe marked coolant flow direction.
Disconnect plug connection (1).
Note:
Mark position of coolant hoses prior to removal.
Release spring clamps (2) and detach coolant hoses.
Unscrew nuts (3).
RA Replacing changeover valve for independent/auxiliary heater
BMW AG - TIS
22.02.2013 12:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -