5 Series E60 530xd (M57T2) SAL
64 52 521
Replacing A/C system compressor (M57T2,
AWD)
Warning!
Refrigerant circuit is under high pressure!
Follow safety instructions for handling R 134a refrigerant .
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant oil.
Important!
Risk of damage!
Restart engine only when A/C system has been correctly
filled.
Read and comply with notes on replacing compressor.
Follow instructions for opening and replacing parts in
refrigerant circuit!
If A/C system is opened for more than 24 hours:
Replacing drier insert for A/C system
Necessary preliminary tasks:
•
Drawing off, evacuating and filling the A/C system are not
included in the time value given for this work operation
•
Remove pressure pipe
•
Remove A/C compressor drive belt
Disconnect plug connection (1).
Release screws (2, 3) and disconnect suction and pressure lines.
Installation:
Replace all sealing rings and moisten with refrigerant oil.
Tightening torque 64 52 1AZ
.
RA Replacing A/C system compressor (M57T2, AWD)
BMW AG - TIS
22.02.2013 12:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
