5 Series E60 530xd (M57T2) SAL
The power window motors for the front doors are controlled by the door modules. The power window motors for
the rear doors are controlled by the body basic module (KBM) (not on the E64).
[more ...]
System functions
The power windows comprise the following functions (described as for the E60):
-
Opening and closing
-
Convenience opening and closing
-
Emergency closing and panic mode
-
Childproof locks
-
Repeat lock
-
Anti-trap circuit (not on the rear power windows on the E64)
-
Load cut-off
Opening and closing
The power windows may be operated from terminal R ON. When terminal R is OFF the power windows can still
be operated for a further minute (encoded in the CAS for deactivation of off-load current violation).
The power windows cannot be operated if one of the front doors is open (dependent on coding).
The side windows can be opened and closed using the following control units:
•
Switch block in the driver's door
•
Power window switch in the front-passenger door or in the rear doors
•
Remote control
•
Driver's door lock cylinder
All the power window switches have two switch levels in either operating direction.
At the first switch level, the side window is opened or closed all the while the switch is pressed.
At the second switch level, the side window is opened or closed fully even after the switch has been released
(one-touch opening and closing).
The power window drive runs at higher speed during one-touch opening or closing.
One-touch opening/closing is only possible with the anti-trap function activated.
To ensure that the side windows are securely closed, the power window motors are briefly moved to the locked
position (mechanical final stop) end in the upper stop.
Convenience opening and closing
This convenience function is controlled by the CAS control unit via the door modules or the body basic module
(KBM).
Convenience opening and can be triggered using the remote control or the driver's door lock cylinder.
Convenience closing is activated when:
•
The remote control button remains pressed and held after locking/deadlocking,
•
The mechanical key is kept in the "Lock" door lock position.
Convenience opening is similarly activated via the unlocking button on the remote control or using the
mechanical key in the "Unlock" door lock position.
The sequence for convenience opening is as follows:
SBT Power windows E60, E61, E63, E64
BMW AG - TIS
22.02.2013 21:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
