5 Series E60 530xi (N52) SAL
11 41 Oil Pump with Strainer and Drive
Type
Thread
Tightening specification
Measure
1AZ Intake pipe to bedplate
N52
M6x30
Replace screws Thread
repairs exclusively with Al
Helicoil.
Jointing torque and angle
of rotation must be
observed without fail.
Jointing torque
4 Nm
Torque angle
100
°
2AZ Oil pump to bedplate
N52
M8x123
Replace screws Thread
repairs exclusively with Al
Helicoil.
Jointing torque and angle
of rotation must be
observed without fail.
Jointing torque
10 Nm
Torque angle
180
°
N52
M8x31
Replace screws Thread
repairs exclusively with Al
Helicoil.
Jointing torque and angle
of rotation must be
observed without fail.
Jointing torque
10 Nm
Torque angle
90
°
3AZ Chain module to crankcase and oil
pump
N52
M6x16
Replace screws Thread
repairs exclusively with Al
Helicoil.
Jointing torque and angle
of rotation must be
observed without fail.
Jointing torque
4 Nm
Torque angle
45
°
4AZ Sprocket to oil pump
N52
M8
Jointing torque
20 Nm
AZD Oil Pump with Strainer and Drive
BMW AG - TIS
22.02.2013 19:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -