5 Series E60 530xi (N53) SAL
Release coolant hose (1).
Disconnect plug connection (4).
Release screws (5).
Installation:
Replace aluminium screws.
Tightening torque: 11 51 1AZ
.
Installation:
If the coolant pump is to be reused, it must be mechanically
rotated once (breakaway torque at impeller).
One coolant pump rotation will be sufficient.
Assemble engine.
Observe venting procedure.
RA Removing and installing/replacing coolant pump (N53)
BMW AG - TIS
22.02.2013 00:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -