bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

11 RA Replacing Suction Line For Power Steering (N52, N53)|Page 1086 > < 10 RA Removing And Installing_replacing Fluid Reservoir For Power Steering|Page 1084
Page 1
background image

32 41 311

Replacing suction line for power steering
(N52, N53)

Warning!

Danger of poisoning if oil is ingested/absorbed through the
skin!

Risk of injury if oil comes into contact with eyes and skin!

 

Important!

Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.

Close off pipe connections with plugs.

Recycling:

Catch and dispose of hydraulic fluid in a suitable container.

Observe country-specific waste-disposal regulations

Necessary preliminary tasks:

Draw off and dispose of hydraulic fluid from fluid reservoir

Remove front underbody protection

Remove intake filter housing

Unfasten hose clip (1).

Detach suction line (2) from vane pump.

Installation:

Marking (P) must point to vane pump.

Align suction line (2) by way of marking (P) to connection on
vane pump.

RA  Replacing suction line for power steering (N52, N53)

BMW AG - TIS

22.02.2013  04:41

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

11 RA Replacing Suction Line For Power Steering (N52, N53)|Page 1086 > < 10 RA Removing And Installing_replacing Fluid Reservoir For Power Steering|Page 1084