5 Series E60 530xi (N53) SAL
33 52 131
Replacing rear left or right spring strut shock
absorber
Special tools required:
•
31 3 340
•
31 3 341
•
31 3 357
Note:
Version with Electronic Damper Control (EDC):
In a warranty case you must always provide a fault memory
printout, even where there is no fault memory entry, with the
defective part.
Warning!
Prior to each use of the special tool 31 3 340 , it is essential
to read the associated Owner's Handbook fully!
All the safety precautions and instructions contained in the
Owner's Handbook must be strictly observed!
Failure to observe these safety precautions and instructions
increases the risk of serious physical injury, damage to your
health and damage to property and equipment!
Important!
1.
Prior to each use, check the special tools for defects,
modifications and operational reliability.
2.
Damaged/modified special tools must not be used!
3.
No changes or modifications may be made to the special
tools!
4.
These special tools are intended solely for the purpose
of tightening and relieving cylindrical and tapered
suspension springs.
RA Replacing rear left or right spring strut shock absorber
BMW AG - TIS
22.02.2013 05:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -