5 Series E60 535d (M57T2) SAL
11 12 595
Checking one valve guide for wear (M57TU)
Special tools required:
•
00 2 510
Necessary preliminary tasks:
•
Remove valve.
To measure tilt clearance, install a new valve so that end of valve
stem is flush with valve guide.
Fit special tool 00 2 510 (dial gauge) and measure tilt
clearance.
Max. permitted tilt clearance:
refer to Technical Data.
Note:
In event of excessive tilt clearance, replace cylinder head and
valves.
Assemble engine.
RA Checking one valve guide for wear (M57TU)
BMW AG - TIS
22.02.2013 01:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -