5 Series E60 535d (M57T2) SAL
Align camshafts so that cam tips of inlet and exhaust camshafts of
1st cylinder point in direction of travel to right.
Note:
See illustration.
Install camshaft.
Align marking (1) on inlet camshaft flush with cylinder head.
Marking (2) on exhaust camshaft flush with cylinder head.
Marking (1) on inlet camshaft must be between markings (2) on
exhaust camshaft.
See illustration.
The inlet camshaft bearing covers are marked E 1 ... E 7 from
the exhaust side.
The exhaust camshaft bearing covers are marked A 1 ... A 7
from the exhaust side.
Fit bearing caps.
RA Replacing camshafts (M57T2)
BMW AG - TIS
22.02.2013 01:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -