5 Series E60 535d (M57T2) SAL
Release screws (1).
Tightening torque 11 65 1AZ
.
Release screws (2).
Tightening torque:
Remove exhaust turbocharger.
Installation:
Clean sealing surfaces and replace seal.
Apply a thin coating of copper paste to bolt thread.
To avoid damaging the threads and prevent turbocharger leakage,
insert retaining screws in 1/2 turns simultaneously.
Assemble engine.
RA Removing and installing or replacing high-pressure exhaust turbocharger (small t
BMW AG - TIS
22.02.2013 01:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
