5 Series E60 535d (M57T2) SAL
12 31 020
Removing and installing/replacing alternator
(M57TU, M57T2, M47T2)
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove fan cowl
•
Remove drive belt for alternator
•
Release power steering pump and place to one side, secure
against falling down/off
•
Release coolant expansion tank and place to one side,
secure against falling down/off
Slacken nut (1).
Unlock connector (2) and remove.
Installation:
The positive power supply of the preheating control unit is also
connected to terminal 30 of the alternator. This lead must be
connected without fail, otherwise the preheating system will fail.
Release screw and remove idler pulley (1).
Unfasten screws.
Pull alternator (2) upwards to remove.
Installation:
Check function of DDE.
RA Removing and installing/replacing alternator (M57TU, M57T2, M47T2)
BMW AG - TIS
22.02.2013 02:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
