5 Series E60 535d (M57T2) SAL
12 51 001
Replacing wiring harness section for engine
(M57T2)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Follow instructions for disconnecting and connecting battery
Disconnect battery negative lead from battery and lay to one
side
•
Remove intake air manifold
•
Remove intake manifold
•
Remove underbody protection
E60:
Unlock cover (1) with slide (3).
Unfasten screws (2).
Remove electronics box cover (1).
Unlock and disconnect plug on control unit.
Unlock DDE control unit and remove.
Unlock and disconnect all plug connections of engine wiring
harness section in electronics box.
E83:
Unfasten screws.
Remove cover (1).
Unlock and disconnect plug on control unit.
Unlock DDE control unit and remove.
Unlock and disconnect all plug connections of engine wiring
harness section in electronics box.
RA Replacing wiring harness section for engine (M57T2)
BMW AG - TIS
22.02.2013 02:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
