5 Series E60 535d (M57T2) SAL
Crank engine with special tool 11 6 480 at vibration damper in
direction of rotation.
Release all screws of torque converter with special tool
24 1 110 .
Tightening torque 24 40 1AZ
.
Prepare special tool (1) 24 4 161 with shaped piece (2)
24 4 164 .
Insert special tool 24 4 160 into opening of transmission housing
and clamp gently with screw (1).
Twist in screw (2) and clamp down.
Then tighten down screw (1).
Release screws.
Tightening torque 24 00 1AZ
.
RA Removing and installing automatic transmission (6HP26Z) M57T2
BMW AG - TIS
22.02.2013 03:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
