5 Series E60 535d (M57T2) SAL
Detach output flange from output shaft.
Remove spacer.
Attach special tool 24 2 353 to output shaft (1).
Screw in special tool 24 2 351 until it is firmly connected with
shaft seal.
Pull out radial shaft seal by screwing in special tool 24 2 352 .
Oil sealing lip of radial seal (1). Drive in radial seal (1) with
special tool 24 2 370 as far as it will go.
RA Replacing output flange shaft seal (GA6HP26Z/6HP32Z)
BMW AG - TIS
22.02.2013 04:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -