5 Series E60 535d (M57T2) SAL
34 11 519
Removing and installing/replacing left or right
front brake caliper
Necessary preliminary tasks:
•
Remove wheels
Observe safety instructions on raising the vehicle.
After completing work: Bleed braking system
Press clutch pedal down to floor and secure with pedal support.
Note:
The pedal support may only be released when the brake lines are
reconnected.
This prevents brake fluid from emerging from the expansion tank
and air from entering the system when the brake lines are opened.
Left side: Disconnect plug connection for wear indicator.
Release brake hose on brake caliper.
Slacken connection for brake hose and brake line.
Installation:
Tighten brake hose on brake caliper.
Tightening torque 34 32 4AZ .
Move steering to straight-ahead position.
Screw brake hose to brake line, ensuring that brake hose is not
twisted.
Tightening torque 34 32 1AZ
.
Release screws (1) and remove brake caliper.
Installation:
Tightening torque 34 11 2AZ
.
RA Removing and installing/replacing left or right front brake caliper
BMW AG - TIS
22.02.2013 06:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -