5 Series E60 535d (M57T2) SAL
2. ISOFIX cover strip
Check marked areas for damage (cracking, breakage, etc.).
3. Side section:
Check side section for tight seating if it is loosely seated:
1.
Check retaining lugs and snap-in fixtures for damage (wear,
breakage, cracking, etc.), replace if necessary.
2.
Check marked guide lugs for damage (cracking, breakage,
etc.).
Also check corresponding counter-supports on body (bending
open, etc.).
4. Rear seat backrest:
Carry out function check (easy folding and snapping into place).
1.
Check center mount for damage (cracking, breakage,
bending, bending open, etc.).
If damage is identified at one of the following points, the
center mount must also be replaced.
2.
Check backrest mount (oval head screw, bushing) for
damage (cracking, breakage, bending, etc.), replace if
necessary.
3.
Check mounting bracket for damage (breakage, cracking,
bending, etc.).
4.
Check backrest head for parallelism to rear parcel shelf.
Check whether there is deformation at backrest head and
backrest moulding.
5.
Check mount of center armrest for damage (breakage,
cracking, bending, etc.).
6.
Check gap for parallelism and uniform distance.
7.
Check mount of backrest lock for damage (breakage,
cracking, bending, etc.).
If damage is identified at the backrest supporting points, the
mounting points on the body must also be checked (bending
open, function, etc.).
RA Checks on rear seat (through-loading)
BMW AG - TIS
22.02.2013 13:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -