5 Series E60 535d (M57T2) SAL
Disconnect plug connections (1) and (2).
Important!
To avoid damaging the independent heater, it is absolutely
essential to adhere to the following connecting sequence for
the plug connections during installation:
1.
Plug connection (1)
2.
Plug connection (2)
Release screws (3).
Remove independent heater (4) in direction of arrow.
Installation:
Make sure exhaust pipe of independent heater (4) is correctly
seated in muffler (5).
RA Removing and installing independent/auxiliary heater
BMW AG - TIS
22.02.2013 16:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -