5 Series E60 535d (M57T2) SAL
67 61 005
Removing and installing/replacing drive unit
with gearing for slide/tilt sunroof
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove front roofliner trim
Note:
Secure drive unit with gearing for slide/tilt sunroof (2) against
falling out.
Release screws (1), tightening torque 54 13 1AZ
.
Lower drive unit with gearing for slide/tilt sunroof (2).
Note:
Screws (1) are microencapsulated.
Unlock plug connection (3), disconnect and remove drive unit
with gearing for slide/tilt sunroof (2).
Installation:
Insert gear wheel (1) of drive with gear for actuating slide/tilt
sunroof (2) in gear teeth.
RA Removing and installing/replacing drive unit with gearing for slide/tilt sunroof
BMW AG - TIS
22.02.2013 18:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -