5 Series E60 535d (M57T2) SAL
Disconnect plug connection (1).
Detach hose (2).
Note:
If firmly seated, gently heat hose (2) on drive unit for lumbar
support (3).
Installation:
Make sure hose (2) is laid without kinks.
Remove drive unit for lumbar support (3).
Replacement:
Pull drive unit for lumbar support (3) in direction of arrow out of
jacket (4).
RA Removing and installing/replacing lumbar support drive mechanism on front seat,
BMW AG - TIS
22.02.2013 18:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -