Replacing Controller Switch For Alternator on 5 Series E60 535d (M57TU)
Note:
M57 and M57TU:
Insert and tighten down contact screws (1).
Fit cover cap (2).
Note:
Only M57:
Install and tighten nuts (1).
Reseal contact screws with sealing compound (2) and cover.
Note:
M57TU only:
Insert and tighten down contact screws (1).
Insert nut (2) and tighten down.
Reassemble alternator.
Assemble engine.
Carry out alternator test with BMW DIS Tester.
RA Replacing controller switch for alternator (M57)
BMW AG - TIS
22.02.2013 02:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -