5 Series E60 535d (M57TU) SAL
12 41 020
Removing and installing/replacing starter
motor
Necessary preliminary tasks:
•
Switch off ignition.
•
Disconnect battery negative lead from battery.
Follow instructions for disconnecting and connecting battery.
•
Remove reinforcement plate.
Version with ARS:
Release nut (1) and remove pressure lines (2).
Release screws (3) and remove holder (4)
Unscrew nut (1).
Tightening torque 12 41 4AZ
.
Disconnect battery positive lead from starter motor.
Release screws (1).
Tightening torque 12 41 1AZ
.
Pull starter motor out of transmission mount and turn in order to
facilitate access to control leads on starter motor.
RA Removing and installing/replacing starter motor
BMW AG - TIS
22.02.2013 02:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -