5 Series E60 535d (M57TU) SAL
13 62 650
Replacing camshaft pulse generator (M57,
M57TU, M57T2)
Necessary preliminary tasks:
•
Read out fault memory of DDE control unit; if necessary, work
through test schedules
•
Switch off ignition
•
Remove acoustic cover
Unlock plug (1) and remove.
Release screw.
Tightening torque 13 62 8AZ
.
Remove pulse generator.
Installation:
Check sealing ring (1) for damage and replace if necessary.
Installation:
Now clear the fault memory.
RA Replacing camshaft pulse generator (M57, M57TU, M57T2)
BMW AG - TIS
22.02.2013 03:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
