5 Series E60 535d (M57TU) SAL
22 11 001
Replacing right engine mount (M57, N43,
N46T, N47)
Necessary preliminary tasks:
•
Secure engine in installation position.
•
Remove front underbody protection.
•
Remove reinforcement plate (M57).
•
If necessary, remove steering cover.
Detach vacuum hose (1) from engine mount.
Release screws (2).
Tightening torque 22 11 2AZ
.
Remove engine mount.
Note:
Illustration similar
Installation:
Lug (1) of engine mount must point to middle of vehicle.
Engine mount designations:
RA Replacing right engine mount (M57, N43, N46T, N47)
BMW AG - TIS
22.02.2013 03:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
