5 Series E60 535d (M57TU) SAL
Insert special tool 24 4 160 into opening of transmission housing
and clamp gently with screw (1).
Twist in screw (2) and clamp down.
Then tighten down screw (1).
Release screws.
Tightening torque, 24 00 1AZ
.
Installation:
Bore (1) in driving disk must be accessible from opening on
engine oil pan.
Check that dowel sleeves are correctly seated.
Replace damaged dowel sleeves.
RA Removing and installing automatic transmission (6HP26Z) M57TU
BMW AG - TIS
22.02.2013 03:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -