5 Series E60 535d (M57TU) SAL
1.
Check load; if necessary, remove load from the vehicle
2.
Bring engine up to operating temperature
Note: Hydraulic fluid temperature must be between 50
°
C
and 70
°
C (vehicle at normal operating temperature)
3.
Connect vehicle to DIS or MoDiC
4.
Start initial operation in SERVICE FUNCTIONS. Follow
instructions in DIS.
5.
Check and correct fill level with engine stopped
RA Initial operation with test run of Dynamic Drive
BMW AG - TIS
22.02.2013 07:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
